S2LP Radio Init structure definition. More...

#include <S2LP_Radio.h>

Data Fields
uint32_t	lFrequencyBase

ModulationSelect	xModulationSelect

uint32_t	lDatarate

uint32_t	lFreqDev

uint32_t	lBandwidth

Detailed Description

Definition at line 113 of file S2LP_Radio.h.

Field Documentation

◆ lBandwidth

uint32_t SRadioInit::lBandwidth

Specifies the channel filter bandwidth expressed in Hz. This parameter can be in the range between 1100 and 800100 Hz

Definition at line 126 of file S2LP_Radio.h.

◆ lDatarate

uint32_t SRadioInit::lDatarate

Specifies the datarate expressed in bps. This parameter can be in the range between 100 bps and 500 kbps

Definition at line 120 of file S2LP_Radio.h.

◆ lFreqDev

uint32_t SRadioInit::lFreqDev

Specifies the frequency deviation expressed in Hz. This parameter can be in the range: [F_Xo*8/2^18, F_Xo*7680/2^18] Hz

Definition at line 123 of file S2LP_Radio.h.

◆ lFrequencyBase

uint32_t SRadioInit::lFrequencyBase

Specifies the base carrier frequency (in Hz), i.e. the carrier frequency of channel #0. This parameter can be in one of the following ranges: High_Band: from 860 MHz to 940 MHz Middle Band: from 430 MHz to 470 MHz

Definition at line 114 of file S2LP_Radio.h.

◆ xModulationSelect

ModulationSelect SRadioInit::xModulationSelect

Specifies the modulation ModulationSelect

Definition at line 119 of file S2LP_Radio.h.

The documentation for this struct was generated from the following file:

/home/prathik/workspace/appiko/nrf5x-firmware/application/rf_data_tx_rx/S2LP_Library/Inc/S2LP_Radio.h